Generally, the macard wifi extender blinking blue light appears when it is in setup mode or connection is in progress. Besides this, if this LED stays for longer than usual timings, then it should be considered as an issue. However, this may happen due to several reasons and it is necessary to troubleshoot this error.
Additionally, if you face such issues and want to explore more about this, then must stay on this page. Here, you find the primary causes which are responsible for the macard wifi extender flashing blue light issue and easy troubleshooting tips to resolve it. So, to explore more, keep reading here!
Reasons for macard wifi extender blinking blue light
Further, it is necessary to understand the various scenarios for the flashing blue light on the wifi extender. A few of them are listed below:
Connection in Progress
The extender is in setup mode and tries to connect to the router. Also, this may happen if the repeater searches for the available router network.
Weak Signals
The extender is struggling to establish a stable link with the router due to the poor signal strength. Besides this, if it is placed out of the router’s range, then the connection is unsuccessful.
Technical glitches
There could be a minor glitch on the extender that causes connectivity issues. Also, if the hardware is damaged or the range booster gets overheated, then a blinking blue light issue occurs.
Signal barriers
If the network signal breaks frequently, then issues may be due to the presence of signal interferences, like furniture, microwaves, mirrors, cordless phones, etc. Sometimes, the macard wifi extender flashing blue light problem arises because of the ISP issue.
Quick fixes for the macard wifi extender blinking blue light
Now, you find the root causes behind the persistent blue light on the Macard wifi extender. Therefore, it is necessary to resolve these issues timely for a successful connection establishment with the router. Also, we shed light on the effective troubleshooting tips to fix these errors in this section, have a glance once:
Check Router and Extender Placement
Initially, ensure your extender is within the range of your router. Likewise, avoid placing the extender near walls, metal objects, or appliances that cause interference. Position the repeater closer to the router or within the same room while connecting to the network.
Power cycle the extender & router
Additionally, to resolve the technical glitches on the extender, power cycle your router and range booster. To do so, plug the extender, router, and then modem and wait for 30 seconds. After that, plug back the device and check if the macard wifi extender flashing blue light issue is fixed.
Contact your ISP Authority
Sometimes network connection is restricted by the ISP authority or there is a local area network outage. This will cause the macard wifi extender blinking blue light issue. So, it is recommended to contact your internet service provider and follow the guidelines they explained to you.
Reconnect the extender and router
If you face the continuous blue light on the extender, then reboot it and reconnect. For this, place the router and extender closer where signal strength is better and use the WPS method to resync them.
Check the Firmware
Make sure your router and repeater runs on the latest firmware. Sometimes network issues appear if the networking device works with outdated firmware. So, it is necessary to check and upgrade the firmware on the router and extender.
Temporarily disable the security extensions on the router
Sometimes repeater can’t connect to the router’s network if security software is enabled on it. Therefore, it is recommended to disable the security extensions on the router till you complete the setup process. After that, you can re-enable these extensions.
Perform a Factory Reset
If none of the above steps work, then hard reset your Macard extender. This will revert your range booster to its default settings and you have to reconfigure it from scratch.
Bottom Line
All in all, this brief post outlines the reasons and fixes for the macard wifi extender blinking blue light. You get elaborative information on the normal behavior of the blue LED and the causes for its appearance among the effective troubleshooting tips.