Learn Macard Wifi Extender Setup in Quick Steps

In this modern era, Macard extenders are one of the smart wireless networking devices. These are available in different models with dual-band technology and other smart features. So, to make the most of these networking devices, you need to carry out the macard wifi extender setup first. After that, you can configure the range extender according to your preferences.

Further, there are three different ways to configure your repeater. In addition, you need to gather a few of the primary things before you begin the macard extender setup. So, if you want to explore more details about the Macard configuration, primary requirements, effective troubleshooting tips, and more, then keep reading this page.

Essentials for the macard wifi extender setup

While you are thinking of executing the setup process for your Macard extender, then get ready with the below-mentioned things with you:

Macard wifi extender/router

Stable network connection

Web/IP address

Admin details

Macard Wi-Fi Manager app

Computer /smartphone

How to set up macard wifi extender via different ways?

Moreover, you are now aware of the primary things that you require for setting up your wireless range extender. Similarly, it is now time to opt for the suitable method to proceed with themacard wifi extender setup. So, we share the detailed steps for each procedure to assist you with the complete configuration process, let’s take a look:

Web Portal Access

Initially, make sure your range extender is placed closer to the router or in the same room.
Now, use your Windows system/laptop to join the Macard wifi extender network.
After that, open the web browser and type in the http://go.macard.online web address in the browser bar.
Here, mention the valid username and password on the login window that prompts you.
Afterward, you reach the setup wizard of the repeater.
Here, proceed with the Wireless Settings to modify the network name and password if not changed yet.
Further, go to the Advanced settings and alter the settings according to your preferences, such as Access Point, Guest Network, Parental controls, etc.
Follow the further instructions to complete the process and tap on Save to apply the modified settings.
Finally, you are done with the Macard repeater setup.

Macard WiFi Manager App

To begin with, check that the router and extender are located nearby.
Further, connect your smartphone to the Macard repeater’s network.
After that, check that you have an updated version of the Macard WiFi Manager app on your smartphone.
Now, launch the app and access the admin account by mentioning the valid admin details on the login window.
If you are a new user, then create an account first and enter the necessary details.
Afterward, you land on the smart dashboard of the range extender.
Further, you have to select the network name first that you want to extend. Next, wait for 30 seconds and do not close the window till the process ends.
Hereon, go to the Wireless Settings and modify the network name (SSID) and password of your wireless network.
Similarly, visit the Advanced settings and configure the Guest Network, AP Mode, Bridge Mode, and more by proceeding with the on-screen guidelines.
At last, click on Save to implement the recent settings and you now understand well how to set up macard wifi extender.

WPS Connection

First and foremost, make sure your range extender is powered on.
After that, check the location of the repeater as it is placed closer to the router.
Next, locate the WPS button on the router first and then on the range extender.
Afterward, press and hold this knob on the router first and then on the range extender simultaneously within 2 minutes.
When the LED on the repeater starts flashing and turns into solid blue, then release the button.
Lastly, the macard extender setup procedure ends successfully.

Why is macard wifi extender setup not working? What are the fixes for it?

Additionally, the setup process for the Macard range extender is quite simple and easy. Therefore, a non-tech person can access and configure this networking device conveniently. Besides this, users sometimes face issues with the configuration, such as extender setup not working or failure, login denials, unable to connect, no network, etc.

In addition, we share the effective macard wifi extender troubleshooting tips that will help you resolve these issues. So, take a look beneath to find the suitable fix out for your repeater:

Primarily, check that the router and the range extender are placed closer to each other or in the same room.
Next, check that the router and modem are joined properly to avoid connectivity issues.
Make sure you enter the accurate web/IP address and admin details while accessing the web interface of the repeater.
Confirm that the range extender is updated to the latest firmware version. If not then access the web interface and check for the update. Here, follow the on-screen guidelines to upgrade the range extender’s firmware.
If you face issues with the wireless network, then connect the ethernet cable to stabilize the internet connection.
If you are proceeding with the WPS method and do not press the buttons properly or release them before the LED blinks, then the macard wifi extender setup not working problem occurs. So, it is necessary to tap the WPS knobs firmly on the router & then on the extender within 2 minutes.
If there is poor signal strength or no network, then contact your ISP authority.
To fix the network disconnectivity, technical glitches, and bugs, then power cycle the repeater.
Make sure you have saved the settings that you modified otherwise your range extender works on default settings.
Eliminate the signal obstructions, like mirrors, furniture, microwaves, baby monitors, etc., or relocate your networking device if unable to remove these interferences.
Temporarily disable the security extensions on the wifi extender, like VPN/Firewall/Antivirus, etc. You can re-enable them after completing the macard wifi extender setup.
Check that you have enabled all the necessary permissions on the Macard Wi-Fi Manager app and remove the unnecessary cache from it.
Remove the unnecessary browser data and check if it responds to the given web address. If not, then shift to another web browser.
When no other method assists you in fixing these issues, then factory reset the repeater. This will revert your networking device to its default settings and you have to reconfigure it from scratch.

Overall, the given information will surely assist you with the detailed information regarding macard wifi extender setup and other details. To explore more, visit us here!